 |
| Quantity: | |
|---|---|
Product introduction:
WD100E single crank arm rock drilling rig is designed for tunnel step method construction, and can adapt to the tunnel rock drilling construction equipment for step method construction.
Main technical features:
1. The crank arm structure is the first in China to meet the step method construction, especially for two-step and three-step construction, it can meet the operation of upper, middle and lower steps.
2. The operation range is large, one-time positioning, and the construction of high-speed rail or high-speed full-section can be completed without moving the car.
3. The crank arm structure can effectively avoid the collision between the arm frame and the steps; the length of the whole vehicle is short, the maneuverability is flexible, and it is convenient to pass through the trestle.
4. Remote control operation, easy to learn, can get started quickly, and can observe the drilling situation at close range.
Technical parameters
Manufacturer | Wuxin |
Model of whole machine | WD100E |
Overall weight (kg) | 17000 |
Dimensions (mm) | 8310*2480*3400 |
Rated impact power (kw) | 18.5 |
Ground clearance (mm) | 300 |
Drilling depth of single rod (m) | 6 |
Maximum driving speed (km/h) | 15 |
Operation mode | Wireless remote control |
Wheelbase (mm) | 4400 |
Gradeability (°) | 15° |
Effective vertical working height (m) | 11 |
Effective horizontal working width (m) | 14 |
Control mode | Electric proportional control |
Product introduction:
WD100E single crank arm rock drilling rig is designed for tunnel step method construction, and can adapt to the tunnel rock drilling construction equipment for step method construction.
Main technical features:
1. The crank arm structure is the first in China to meet the step method construction, especially for two-step and three-step construction, it can meet the operation of upper, middle and lower steps.
2. The operation range is large, one-time positioning, and the construction of high-speed rail or high-speed full-section can be completed without moving the car.
3. The crank arm structure can effectively avoid the collision between the arm frame and the steps; the length of the whole vehicle is short, the maneuverability is flexible, and it is convenient to pass through the trestle.
4. Remote control operation, easy to learn, can get started quickly, and can observe the drilling situation at close range.
Technical parameters
Manufacturer | Wuxin |
Model of whole machine | WD100E |
Overall weight (kg) | 17000 |
Dimensions (mm) | 8310*2480*3400 |
Rated impact power (kw) | 18.5 |
Ground clearance (mm) | 300 |
Drilling depth of single rod (m) | 6 |
Maximum driving speed (km/h) | 15 |
Operation mode | Wireless remote control |
Wheelbase (mm) | 4400 |
Gradeability (°) | 15° |
Effective vertical working height (m) | 11 |
Effective horizontal working width (m) | 14 |
Control mode | Electric proportional control |
简体中文